KVM200 HDMI 2X2 switcher Manual

The KVM200 allows two of your devices to share a USB keyboard, USB mouse, and two HDMI monitors to control 2 desktop or laptop computers or game consoles. Designed for the need to multitask between two computers to improve productivity or gaming in the office or at home. HDMI2. 0 two in two out, support 4K output dual display in the same screen or extended display. Support remote control and manual key switch at the top of the machine to switch between two computers.

Product functions:
• 2-in-2-out KVM switching extender that controls up to 2 computers or laptops, comes with a set of USB keyboards, mice, and shared dual monitors for extending or copying displays.

Each PC is required to support more than two screens. If your computer supports this feature and only has one HDMI port, you can use a converter or conversion cable, such as VGA/DVI/DP to HDMI converter or conversion cable.

• Ultra HD 4K@60Hz HDMI KVM dual display – supports 3840*2160@60Hz/3D/1080P resolution, complies with HDMI 2.0 standard, built-in automatic EDID makes image display more delicate and realistic.

• Two switching modes: 1. Hotkey switching can be selected (please refer to the hotkey operation instructions on the next page for the hotkey switching method). 2. You can also switch the two signal sources by pressing buttons on the panel, and the status light indicates the port activity status.

• The KVM provides two USB2.0 ports and two USB3.0 ports to support various USB devices. USB devices can be used on any computer without repeated plugging and unplugging.

Tip: Please connect the mouse and keyboard to the K/M interface, otherwise the hotkey switch cannot be used.

· Precautions for Connecting Dual KVM monitors – If you want both monitors TO work, make sure that each computer/laptop has two HDMI cables and one USB to TYPE-C cable connected to the KVM switch. Ensure that all cables are intact. Connect them tightly and ensure that all cables are intact.

 

Switching mode description:
1. Key switching: Press the key on the KVM panel to switch to PC1 PC2.

When PC1 IN1 or IN2 is on, PC1 is in

If IN1 or IN2 of PC2 is on, it indicates that PC2 is currently in use.

2, remote control switch: in the infrared remote control attachment can be used to achieve remote switch (about 15 meters).

The indicator mode is the same as the push-button mode.

3. Keyboard hotkey switch:

Press Ctrl + Shift + 1 to switch to PC1.

Press Ctrl+ Shift + 2 to switch to PC2.

You can also switch between PC1 and PC2 by pressing CTRL twice;

Ctrl+Shift+R: Reset the KVM.

Ctrl+Shift+K: Enable/disable the hotkey function.

Join instructions:
Step 1: Connect the USB TO TYPE-C cable and power the KVM switcher.

Step 2: Connect the PC1 and KVM switcher using a USB TO TYPE-C cable and a 2HDMI cable.

Step 3: Use a USB TO TYPE-C cable and a 2HDMI cable to connect the PC2 and KVM switcher.

Step 4: Connect the keyboard and mouse to the KVM switcher.

· Step 5: Connect the two monitors and KVM switchers using two HDMI cables.

Note:
· Please use the original USB to transfer to TYPE-C data cable.

· Please use a good quality 19+1 26AWG HDMI cable no longer than 5 meters.

· If your computer only has one HDMI port, you will need to convert other output ports on your PC, such as DP port, VGA port, etc., to use the HDMI signal and connect it to the KVM switch.

· Please insert the keyboard into the specified USB port, do not insert other USB ports, otherwise the keyboard hotkey switching function will be lost.

· The output signal of “Output1” is “IN1” of PC1 and “IN1” of PC2, and the output signal of “Output2” is “IN2” of PC1 and “IN2” of PC2, so their combination should be: When switching to PC1, the signal of IN1 of PC1 group is output through the Output1 channel. The IN2 signal is exported from the Output2 channel. When switching to PC2, the IN1 signal in PC2 group is output from the Output1 channel and the IN2 signal is output from the Output2 channel.

Supported system: Windows XP, 7, 8, 10, 11; MAC, Linu, Unix ect