Boot interface
Wireless connection method:
7. Open the browser that comes with the mobile phone and enter the IP address 192.168.49.1 (the display device will display the IP on the boot interface), and there will be WIFI AP, click WIFI AP-Scan-select your home router WIFI-Connect- —Connecting, go back to your mobile phone settings and re-select the WIFI of your home router. (Note that if the IOS system is configured as a 2.4G product, there is no need to switch to connect, just select mirroring and screen projection)
8. Short press the button in the middle of the screencaster to see that you have selected Miracast in the lower right corner of the interface on the display device, open the phone settings and select the device DONGLE-**** found in the multi-screen interactive search to connect to the screen.
The operation method of HP510 HP512 Android screen projection video is as follows:
The operation method of Apple projection video is as follows:
The operation method of Apple connecting to network video is as follows:
Note:
1. Use of I-O-S: (1) Support systems above Ios7.
(2) Mobile phones support 480*320-1136-640 P resolution, and tablets support 1024*768-2048*1536 P resolution.
(3) Mobile phones or tablets are required to have 40M memory space.
2. Mirror adapter WIN10 system use: (1) Support WIN10 system, and the running memory is more than 1G. (2) Compatible with all laptops and tablets.
(3) Support 1080P resolution. 3. Use of mirror line Android Android system:
(1) Support Android 4.2 and above, and the running memory is more than 1G.
(2) Compatible with most Android phones and tablets.
(3) Mobile phones/tablets support 1080 P resolution.
(4) Mobile phones or tablets are required to have 40M memory space.
Wired connection method:
1. IOS system: After connecting the phone/tablet by wire, if a dialog box appears whether you trust it, click Trust to connect.
2. Android system: After connecting the phone/tablet by wire, open “Developer Options” and click USB debugging to connect.
skills:
1. External speaker: The same screen device can be connected to the speaker, and the audio cable is used to connect the same device and the speaker.
2. Connect to the router WIFI: After connecting to the router WIFI, check the IP address in the upper left corner of the boot screen. Use the browser that comes with the phone to enter the IP address.
3. The same screen button: Short press to switch the mode DLNA (ios compatible)/Miracast.
4. Product restart: Long press the switch button in the middle of the same screen for 10 seconds, the product can restart.
The method of restarting the video is as follows:
HP510 HP512 restart method:
您好!Please login