Brief introduction:
CS561 Fiber Switching Splitter Spdif digital Audio switcher allows users to connect one digital fiber Spdif signal source to three power amplifiers or active speakers fiber Spdif fiber audio.
The CS562 allows users to switch three digital fiber Spdif signal source connections to input fiber Spdif fiber audio into a single power amplifier or active speaker
Product features:
One fiber optic signal is switched to three Spdif signal receiving devices.
Audio format support: PCM2.0 / DTS/Dolby-AC3
Supports signal retiming at 192Hz
The cable loss is less than 0.2Db/m, and the output distance is up to 40m, without quality loss.
Overvoltage protection prevents damage from connecting mismatched power adapters to the machine.
Optical fiber digital signal one in three out (CS561)/ three in one out (CS562).
- Specifications:
Product interface …………………………… Digital optical fiber one in three out
Support audio format ……………………… PCM2.0 / DTS/Dolby-AC3
Output cable distance…… … …… .≤40m (Cable loss less than 0.2Db/m)
Power supply ………………………………… .DC5V/1000mA
Operating temperature range…… .. ………………… (0 to + 40℃)
Operating humidity range …………… … 5 to 90% RH (no condensation)
Dimensions (L x W x H) ……………… 53x53x22 (mm)
Weight… .. …………………………………………… 32g
Note:
Please use the machine as the instructions listed to maintain the long service life of the machine.
1. The machine should be placed away from humid, high temperature, dusty, corrosive and oxidizing environment.
2. All components will not be subjected to strong vibration, impact, fall.
3. Do not touch the power adapter with wet hands.
4. Hold the head of the power adapter and do not pull the power cord when removing it from the socket.
5. Please turn off the power when you do not use the machine for a long time.
6. Do not open the lid or touch the internal parts.
7. Use the original power adapter.
Before powering on the device, check the cable carefully. And ensure that all interfaces are properly connected.
您好!Please login