CS160 six-channel audio signal switcher Use Manual

he CS160 is a feature-rich 6-channel stereo source signal selector switcher with output volume adjustment. No power supply, straight plug, convenient and efficient. It can switch transmission input and output signals without loss, suitable for all kinds of stereo signal source equipment, such as TV, MP3 player, CD player and so on. Through the six-channel sound source signal selection and switching, to solve the cumbersome problem of line plug and unplug, just connect the equipment signal source to the switcher, you can easily select. The product input and output adopt standard 3.5mm and 6.5mm interface design, and the compatibility is strong. Precise switching switch, manual operation of 6 gears, simple and intuitive. The CS160 is the ideal choice for your audio equipment management, bringing you a more convenient operating experience.

Connection method:

1. TV, MP3, CD and other players will connect the audio input signal to the CS160 rear panel input port [IN1-6] (input interface support 6.5mmTRS/3.5mmTRS);

2. From the CS160 OUTPUT outlet [output] to the power amplifier device input port (CS160 output interface supports 6.5mmTRS/3.5mmTRS);

3. Rotate [INPUT SELECTOR] the audio switch of 6 gears to select the channel to be input;

4. Select the input audio channel and turn the VOL knob to adjust the volume of the channel.

Product parameters:

Brand: AYINO

Model :CS160

Input interface :3.5MM/6.5MM audio port

Output interface :3.5MM/6.5MM audio port

Input and output impedance :10KΩ – 50KΩ

Frequency response :20-20kHz

SNR :S/N:>98dB

Material: Metal case

Dimensions (L x W x H):132x58x44(mm)

Net weight :336g

Attention:

Please use the machine as listed instructions to maintain the long service life of the machine.

1. The machine should be placed away from humid, high temperature, dusty, corrosive and oxidizing environment.

2. All components will not be subjected to strong vibration, impact, fall.

3. Do not open the lid or touch the internal parts.

7. Check the cable carefully. Make sure all interfaces are properly connected.