EP805Car Bluetooth headset Charger

Car charger bluetooth headset

Why use smart car Bluetooth:

Avoid placing a mobile phone in a dangerous situation while driving while driving.

Super simple: Pick up the smart connection to avoid the tedious operation of ordinary earphones.

Compatible with QC4.0 Super Fast Charge Dual USB devices will no longer be powered off.

Keep your privacy when answering the phone.

 

Car charger chip function:

Short circuit protection

Overcurrent protection

Overvoltage protection

Overcharge protection

Over temperature protection

Troubleshooting automatically resume charging

Instructions

first step: Remove the headset from the car charger, the headset will automatically turn on (when the car charger is plugged into the cigarette lighter and connected to the power supply).

If the car charger is not connected to the power supply, take out the headset and press and hold for 5 seconds to turn it on.

The second step: Turn on the phone’s Bluetooth, search for the Bluetooth device “EP805” point to connect.

 

Call function definition operation

Incoming call sound effect: the caller’s headset broadcasts the caller’s name in Chinese

Incoming call answering: click once

Hang up the call: click twice quickly (double click)

Incoming call rejection: long press and touch for 1 second, prompt “beep”

Headphone power off: Long press the touch area for 5 seconds/power on for 3 minutes without connection and automatically power off

Music function definition operation

Play/Pause: Quickly click twice (double-click)

Play the next song: click 3 times quickly

Voice assistant operation method

Apple system: In standby mode, long press for 1 second to wake up “siri”

Android system: support wake up voice assistant (make sure the Android phone comes with it)

The headphone lighting effect is defined as follows

The headset is turned on and the phone is not connected: the red and white lights flash alternately

Turn on the headset and connect to the mobile phone: the white light flashes slowly

Long press to shut down: the red light flashes 3 times quickly

Headphone charging status: Red light is on

The headset is fully charged: the white light stays on for 5 seconds, and the light is off

The headset is connected to the mobile phone to call: the white light flashes quickly

Headphone parameters

Product name…………Wireless unilateral Bluetooth headset

Wearing style…………In-ear

Frequency response range…………20Hz-20KHz

Product impedance…………16Ω±15%

Sensitivity…………103±3dB At1000Hz At0.126

Headphone size…………37*12*25MM

Bluetooth receiving distance…10 meters

Bluetooth version…………………………BLUETOOTH 5.0

Support protocol…HSP/HFP/A2DP(SBC, ACC)/AVRCP

Transmission range………………………. 2.4GHz (2402-2480MHz)

Headphone charging time…………approximately 90 minutes

Headphone music time…………100% volume about 5 hours

Talk time…………………… about 4 hours

Standby time…………………….approximately 100 hours

Headphone battery capacity…………40mAh

Headphone charging voltage and current…………………..5V/50mA

Working temperature…………………………………-10℃—45℃

Charging method…………………………………..Thimble charging

Headphone weight………………4.2g

Precautions

Please store at room temperature

Do not expose this product to rain or humid environment

Please don’t disassemble, repair or modify this product

Please follow the instructions