CS563 Digital Coaxial Distributor Manual

CS563 Coaxial Switching Distributor The COAXIAL digital audio switcher allows users to connect three digital coaxial COAXIAL signal sources to a coaxial COAXIAL output on the AV amplifier.

When the three LED signal indicators are all lit, the function status of the input signal distribution.

This COAXIAL digital optical audio splitter allows users to connect and distribute a digital coaxial COAXIAL source to three power amplifiers. TVs, computers, set-top boxes, game consoles, Blu-ray DVDs, network players, etc. share a set of speakers or power amplifiers connected to high-fidelity sound quality.

 

Features:

The three coaxial signals are switched to a set of COAXIAL signal receiving equipment.

Audio format support: LPCM2.0 / DTS / Dolby

Support signal retiming, support 192Hz The cable loss used is less than 0.2Db/m, and the output distance can reach 40m without quality loss. Input control can be through R/M, or you can directly press the button

Metal shell, better anti-interference.

Overvoltage protection can prevent damage caused by connecting a mismatched power adapter to the machine.

The coaxial digital signal has three inputs and one output, and one input and three outputs.

Support remote control button switching mode.

 

               

       

 

Specifications: ​​ ​​​​​​

Input interface………… Digital coaxial 3+1

Support audio format…………LPCM2.0 / DTS / Dolby-AC3

Peak wavelength………… 650nm

Maximum baud rate………… 16Mbps

Output cable distance…… …… ≤40m (cable loss is less than 0.2Db/m)

Power supply…………………………………DC5V/1000mA

Operating temperature range…… (0 to +40℃)

Operating humidity range…… 5 to 90%RH (no condensation)

Dimensions (length x width x height)…… 95x55x20 (mm)

Weight… 150g

 

Attention: ​​

​​​​​​​​​​​​​​​ Please use the machine as the listed instructions to maintain the long life of the machine.

1. The machine should be placed away from humid, high temperature, dusty, corrosive and oxidizing environments.

2. All parts will not be subject to strong vibration, impact, or falling.

3. Do not touch the power adapter with wet hands.

4. Please hold the power adapter head and do not pull the power cord when unplugging from the socket.

5. Please turn off the power when not using the machine for a long time.

6. Do not open the cover, and do not touch the internal parts.

7. Please use the original power adapter. Please check the connection line carefully before powering on. And make sure that all interfaces are properly connected.