{"id":3546,"date":"2023-04-10T10:40:59","date_gmt":"2023-04-10T02:40:59","guid":{"rendered":"https:\/\/www.aoyint.com\/english\/?p=3546"},"modified":"2024-07-25T13:38:33","modified_gmt":"2024-07-25T05:38:33","slug":"wr385-manual","status":"publish","type":"post","link":"https:\/\/www.aoyint.com\/english\/wr385-manual.html","title":{"rendered":"WR385 5.8GRF Wireless Audio Transceiver Use Manual"},"content":{"rendered":"

WR385 5.8G wireless audio reception and transmission high fidelity lossless and low delay transmission, no need to set, plug and play, one more than one receiver (up to a transmitter with 3 receivers), transmission distance greater than 50 meters, support fiber, coaxial, L&R input and output, at the same time support U disk lossless playback transmission. And provide the receiver of its own power amplifier directly drive the passive speaker, is to avoid re-routing the line lossless home wireless surround sound. Widely used in home theater, hotel clubs, outdoor activities, education and training, conference office and other scenes.<\/p>\n

<\/p>\n

Product characteristics<\/strong><\/h2>\n

When used for the first time, you only need to press the pairing key on the receiver for 3 seconds to pair with the transmitter, and then as long as the receiver and sender are powered on, it will automatically pair and work.<\/p>\n

WR385 TX Transmitter:<\/strong><\/p>\n

Input interface: Fiber + coaxial +AUX+USB playback
\nOutput interface: 5.8G RF wireless lossless transmission
\nKey operation: Switch the input channel, adjust the volume, switch the up and down song, etc
\nIndicator: Indicates the 5.8G wireless connection status and input channel
\nPower input: DC 5V\/1A adapter power supply
\nUSB flash drive format: Support FAT16\/FAT32\/exFAT Maximum capacity 128G
\nU disk broadcast format: mp3 \/ wma\/WMV\/aac \/ : m4a\/aif\/wav\/ape\/flac, etc
\n(wav\/ape\/flac support 96Khz@24bit)<\/p>\n

WR385 RX Receiver:<\/strong>
\nInput interface: 5.8G RF wireless lossless transmission
\nOutput interface: fiber + coaxial +AUX
\nButton operation: pairing transmitter and mute operation through the button
\nIndicator: Indicates the 5.8G wireless connection status and power amplifier working status
\nPower input: DC 5V~1A adapter power supply<\/p>\n

WR385 RX Amplifier:<\/strong>
\nInput interface: 5.8G RF wireless lossless transmission
\nOutput interface: AUX stereo active output +2 channel 40 watt digital power amplifier output
\nButton operation: pairing transmitter and mute operation through the button
\nIndicator: Indicates the 5.8G wireless connection status and power amplifier working status
\nPower input: DC 12V~20V\/2A adapter power supply
\nAutomatic power amplifier function: when the transmitter has no audio input or shutdown for more than 10 seconds, the receiver will automatically turn off the power amplifier to reduce heat and consumption; When the transmitter resumes the signal input, the receiver will automatically turn on the power amplifier and work normally.<\/p>\n

Transmitter operation instructions:<\/strong>
\nINPUT button: short time for cyclic switching input source: OPT->COX->AUX->USB;
\n(Automatically detect U disk insert and play automatically, if no U disk is inserted, switch automatically skip USB mode)
\nLong time for soft shutdown (then short press to start)
\nVOL- button: short time for the “previous song” function when the U disk is playing (short press in other modes is invalid)
\nVolume reduction function when held for at least 3 seconds (Long press in any mode)
\nVOL+ button: Short time is the “next song” function when the U disk is playing (short press in other modes is invalid)
\nVolume increase function when holding for at least 3 seconds (this works in any mode)<\/p>\n

LED indicator description:<\/strong>
\n5.8G: Steady red indicates that the connection is normal, and blinking indicates that the pair is waiting
\nOPT: If the indicator is steady blue, the optical fiber input mode is displayed. If the indicator is blinking, the signal input is displayed
\nCOX: When the indicator is blue, the indicator is in coaxial input mode and the indicator is in signal input mode
\nAUX: Blue, if the steady on is in AUX input mode, and if the blinking is in signal input mode
\nUSB: When the indicator is blue, it is in USB Play mode, and when the indicator is blinking, it indicates that there is signal input<\/p>\n

 <\/p>\n

Interface:<\/strong><\/p>\n

<\/p>\n

High turn bottom input line connection: NC empty foot, GND ground (black line) is not required to be connected, some power amplifiers may be connected to the black line to jointly eliminate noise. Red and white wire pairs should be connected to the output of the left and right channels (red positive, white negative)<\/strong><\/p>\n

Receiver operation guide<\/strong>
\nON\/OFF button: hardware power switch, press to start, eject to shut down;
\nLINK button: Short press to mute the power amplifier and enter the low power mode, then short press to restore the working state and long press for at least 3 seconds to pair with the transmitter. During the pairing process, the “5.8G” indicator will flash several times, and after successful pairing, the indicator will turn to steady on and emit a “beep” sound (Any time long press is pairing operation, only the first time you need to pair. Or it may have been paired at the factory)<\/p>\n

LED indicator description:<\/strong><\/p>\n

5.8G: Steady blue: 5.8G wireless connection is normal, blinking: waiting for pairing<\/p>\n

ERROR: Steady blue: The power amplifier enters the protection mode, and the power amplifier works normally<\/p>\n

\"\"<\/p>\n

Power amplifier receiver interface:<\/strong><\/p>\n

\"\"<\/p>\n

 <\/p>\n

<\/p>\n

Broadcast mode:<\/strong><\/p>\n

<\/p>\n

5.8G wireless transmission function parameters:<\/strong><\/p>\n